help for asm file

Discussion in 'Programmer's Corner' started by seti75, Aug 18, 2009.

  1. seti75

    Thread Starter New Member

    Feb 7, 2009

    ( Excuse me, my English is very bad )

    J board manufactured this alarm this site - >

    files -->

    the problem ---->
    now after first detection alarm ---> standby
    my alarm test -->

    first intruder ..alarm...ok ......second ( two...3..4...5...intruder --> no alarm )...

    I want a different operation.
    if the alarm detects a intus, it should not be stanby mode after.
    alarm always detect
    Alarm still if intruder

    is what someone can file amended asm for the alarm also works after the first detection?
    standards are different in France