So I have this chip... SN74LS47N which I found the datasheet for and it is a TI BCD to 7-Segment driver.
I have two of these and I have checked the circuit about 10 times and this is what I am getting:
I have VCC = 5v
and connected the H to the same VCC for high and to ground for L.
What I see is that the chip "almost" works but the H and L outputs are at 0.11v and 0.07v!!! And I cannot figure out why!
I have two of these and I have checked the circuit about 10 times and this is what I am getting:
I have VCC = 5v
and connected the H to the same VCC for high and to ground for L.
What I see is that the chip "almost" works but the H and L outputs are at 0.11v and 0.07v!!! And I cannot figure out why!
Attachments
-
54.7 KB Views: 12