Grove LCD Class

Discussion in 'The Projects Forum' started by Galibore, Jun 4, 2012.

  1. Galibore

    Thread Starter New Member

    May 22, 2012
    Hi Guys,

    Please allow me to introduce myself. My name is Andre, I am a .Net developer by trade but have always been keen to learn more about electronics.

    I am an absolute newb and know almost nothing about electronics, but I am a fast learner and you guys seem very knowledgeable. Apologies up front for dumb questions, but all help will be appreciated as I know that you guys give your free time for free to help others.

    Because I've always been a Microsoft techie, I bought a Netduino Plus, a serial Grove LCD and other bits and pieces.

    There are probably libraries out there, but I couldn't find any in a hurry so I wrote a class for the Grove 16x2 LCD with serial backpack.

    You can find a demo app and library attached.

    Any critique will be welcomed!

    The GND and VCC pins I connected to the GND and 5V pins on the Netduino respectively. The RX and TX pins to digital pins 3 and 2 on the netduino.

    Great to be on board and thanks for a great site and forum!!