GPIO-24 PWM Help

Discussion in 'Embedded Systems and Microcontrollers' started by Stanton, Apr 18, 2011.

  1. Stanton

    Thread Starter New Member

    Apr 18, 2011
    Hi Guys,

    I have a GPIO-24 and need to create a PWM signal to run an IFI robotics speed controller, the victor 884. If anyone has knowledge of these two items I could use some help.

    Basically my questions are in the coding of how to command the GPIO-24 to send the PWM signal.

    If someone has knowledge of how to use a GPIO-24 I can give a more detailed question.