Flyback converter design
- Thread starter ADI89
- Start date
The Completed Projects Forum is for Completed Projects only. It is meant to allow members to show plans for projects they built so other members can duplicate them if desired. New threads are also automatically moderated per Moderator review for this reason. Your thread does not belong in this forum, and was moved here.
Hi AD,
So you just want to know the forumals for C & L or you wantt to design a Flyback converter and want to see how to find the proper L and C?
Please see if the below can help you or you need more help?:
http://www.simonbramble.co.uk/dc_dc_converter_design/flyback_converter/flyback_converter_design.htm
This question comes up fairly often in Nuts & Volts magazine - the columnist who does the Q&A pages has got pretty well practised at trotting out the formulas every few months.
muthuarasu205
- Joined Oct 20, 2013
- 1
Hai guys i designed flyback converter its input is 127 to 400V and output is 24V when i give 127V its 24V output but if i change the input output also change and i check compensation circuit its ok i don't know why
transformer winding is 38:09 and Lp is 228uH and output capacitor is 560uF and Ro is 4ohm and in error amp type 2 is R1 is 1 and R2 is 10 ohm and c1 is 10uF and c2 id 1uF.
transformer winding is 38:09 and Lp is 228uH and output capacitor is 560uF and Ro is 4ohm and in error amp type 2 is R1 is 1 and R2 is 10 ohm and c1 is 10uF and c2 id 1uF.
Last edited:
Please don't hijack someone else's thread. Start your own.
