Im VERY new to making circuits. I saw someone on a HID lighting forum made his high beams on his bixenon headlights flash rapidly with a push of a button. here is a link to the video of his headlights: http://www.youtube.com/v/pgexwYy8H28&hl=en&fs=1 (@ :10 and @ :35 in video)
Basically, what im trying to do, is get two solenoid coils to activate about 4 or 5 times a second by pushing a momentary switch in the cabin. The solenoids need 12v DC to activate and the flasher needs to run on 12-14v DC. I tried a led flasher that i bought but the solenoids together draw too much current and fried the flasher. Any help would be greatly appreciated. A diagram would be even better thanks in advance.
Basically, what im trying to do, is get two solenoid coils to activate about 4 or 5 times a second by pushing a momentary switch in the cabin. The solenoids need 12v DC to activate and the flasher needs to run on 12-14v DC. I tried a led flasher that i bought but the solenoids together draw too much current and fried the flasher. Any help would be greatly appreciated. A diagram would be even better thanks in advance.
Last edited: