Hello
I have designed a system to arm/disarm my Bosch 3000 series alarm system and also let me know when the system is armed/disarmed. The information is required on my PC which is running an MQTT broker.
I have used a ESP8266 / NodeMCU chip to relay the info and an optocoupler to isolate the alarm panel from the ESP8266 (and vice versur).
I have attached my schematic below and hoping to get any feedback anyone has on it before I commit to building it.
These are the components I plan on using:
OPTO Coupler:
https://www.sparkfun.com/datasheets/Components/SMD/ild205t.pdf
NodeMCU ESP8266:
https://makerzone.com.au/product/esp12-dev-board/?attribute_bundle=CH340&attribute_bulk=1pc&utm_source=Google Shopping&utm_campaign=Google Shopping&utm_medium=cpc&utm_term=1500099&gclid=CjwKCAjw-sqKBhBjEiwAVaQ9aw1y1hd2M-7sEOavJK-al2jj5OM7CrzJhwnQ1H6540E4owbQNJjSjhoC_twQAvD_BwE
Bosch 3000 alarm system:
https://resources-boschsecurity-cdn...0_In_Installation_Manual_enUS_20399486987.pdf
I have designed a system to arm/disarm my Bosch 3000 series alarm system and also let me know when the system is armed/disarmed. The information is required on my PC which is running an MQTT broker.
I have used a ESP8266 / NodeMCU chip to relay the info and an optocoupler to isolate the alarm panel from the ESP8266 (and vice versur).
I have attached my schematic below and hoping to get any feedback anyone has on it before I commit to building it.
These are the components I plan on using:
OPTO Coupler:
https://www.sparkfun.com/datasheets/Components/SMD/ild205t.pdf
NodeMCU ESP8266:
https://makerzone.com.au/product/esp12-dev-board/?attribute_bundle=CH340&attribute_bulk=1pc&utm_source=Google Shopping&utm_campaign=Google Shopping&utm_medium=cpc&utm_term=1500099&gclid=CjwKCAjw-sqKBhBjEiwAVaQ9aw1y1hd2M-7sEOavJK-al2jj5OM7CrzJhwnQ1H6540E4owbQNJjSjhoC_twQAvD_BwE
Bosch 3000 alarm system:
https://resources-boschsecurity-cdn...0_In_Installation_Manual_enUS_20399486987.pdf
