I am making an electronic pendulum and have a very basic coil and circuit for sensing the magnet and driving the magnet which I was fortunate enough to get help with. I have a drawing of the circuit attached. My question is this... I want to place two LEDs in the circuit to pulse when the magnet enters and triggers the sensing coil and then another LED to fire when the Outer drive coil is triggered by the transister. Is it as simple as placing an LED in line with each coil or with so much I am learning about electronics it is not that simple.
Any and all help would be greatly appreciated in this matter.
Thank you,
Jeffrey
Any and all help would be greatly appreciated in this matter.
Thank you,
Jeffrey
Attachments
-
144.7 KB Views: 63