Hi.

I need to build a project with ECIO 40P microcontroller. In my project I need:
1. 2x A/D channels
2. PWM output
3. 4x Digital I/O channels
All of them must be controllable 0V-5V, with 0.5V stepping.

But here's what I'm confused about:
What are the pins for A/D channels or the PWM output? Does Digital I/Os mean the RA0, RA1... RB0,RB1 etc?
I use Flowcode to program, if it helps.
Also, are the PWM and AD stuff built-in microcontroller or do I have to make circuits for them myself?

Datasheet:
http://www.sourceboost.com/Products/ECIO/Overview/ECIO-DataSheet.pdf

Thanks.

 

It uses this chip: PIC18F4455
So use this data: http://ww1.microchip.com/downloads/en/DeviceDoc/39632e.pdf


Also, the pdf you linked says it has 9 A/D lines, I looked around and other places say there are 13 A/D lines. Weird.