Did I get the right value for the job?

ifixit

Joined Nov 20, 2008
652
  • The 104K 250E will do for the .1K 250VDC
  • The .47K 250 is 10 times the value needed for the .047K
  • The .001J 100 is 100 times too low for the .1K
Regards,
Ifixit
 

CoolBeer

Joined Mar 29, 2010
40
Nice sharp images, though. Which camera and setup do you use?
We can inspect the exif of the image to find out a lot of information:
Rich (BB code):
Orientation of image:  1
File change date and time:  2010:03:25 12:39:52
Image description:            
Image input equipment manufacturer:  NIKON
Image input equipment model:  COOLPIX L5
Software used:  COOLPIX L5V1.0
Exposure time:  0.03125
F number:  4.9
Exposure program:  2
ISO speed rating:  79
Exposure bias:  -2
Maximum lens aperture:  2.9
Metering mode:  5
Light source:  0
Flash:  25
Lens focal length:  6.3
Custom rendered:  0
Exposure mode:  0
White balance:  0
Digital zoom ratio:  0
Focal length in 35 mm film:  38
Scene capture type:  0
Gain control:  1
Contrast:  0
Saturation:  0
Sharpness:  0
Subject distance range:  0
 
Top