I'm not too good @ designing this complicated material. Please help in any way possible:

Design a tuned common emitter-amplifier stage to operate at 100kHz. Use a bypassed emitter resistor and set the quiescent current at 1.0 mA. Assume Vcc= +15V and L=1mH and put a 6.2 K resistor across the LC to set Q = 10.Use capacitive input coupling.

 

Here is a place to start reading in our Ebook - http://www.allaboutcircuits.com/vol_3/chpt_4/5.html.

Sorry we're not a design service.