hey there..
I really hope u guys can help me extracting the important element from the question below;
A signal is sampled at the sampling rate of 10kHz. The signal has useful signal content between 1kHz and 2.4kHz, and distortion of not more than 1dB is required for this range. It is known that the signal is corrupted with noise above 3.6kHz. This noise needs to be attenuated by at least 40dB.
i need confirmation from u guys whether i'm in the right direction to solve this problem..
i just need to know how can i get the value for another stopband frequency..
that's all.. i can solve this question, but i just need that value..
I really hope u guys can help me extracting the important element from the question below;
A signal is sampled at the sampling rate of 10kHz. The signal has useful signal content between 1kHz and 2.4kHz, and distortion of not more than 1dB is required for this range. It is known that the signal is corrupted with noise above 3.6kHz. This noise needs to be attenuated by at least 40dB.
i need confirmation from u guys whether i'm in the right direction to solve this problem..
i just need to know how can i get the value for another stopband frequency..
that's all.. i can solve this question, but i just need that value..
