CX Programmer and Profinet configuration

Thread Starter

arpix

Joined Oct 27, 2011
2
Hi all!

I need some advice with some of PLC programming.

Im making one configuration with Profinet comunications!

This is what i have Omron PLC:
CJ1M CPU13
CJ1W PNT21
CJ1W TERO1
GRT1-PNT
GRT1-ID4-1
GRT1-OD4-1
GRT1-END
GRT1-PNT
GRT1-AD2
GRT1-DA2V
GRT1-END

Ok i had made a configuration in CX-Configurator. And my cards i/o cards are conected.

But i dont know how to activate one of the Digit Out on OD4-1 card.

Can someone put me some exaples how to do it in CX programmer?
And maby one exaple how can i reach the address and activate the transistor output on that card.

Thank you for help and advice!

Best regards Arpad
 
Top