I'm trying to convert ceiling fan into a fan that plugs into the wall. I think it was initially set up as a 3 speed and had lighting controls. is it possible to convert it to a normal wall plug and using a potentiometer to control speed?
specs: 120v 60hz .6amps 68w
here are some snaps of it:
http://i301.photobucket.com/albums/nn65/hvideo1/Picture2-1.jpg
motor
http://sleeptyrant.com/Picture.jpg
the potentiometer I have from lighting controls (not sure if it will work for motor speed)
specs: 120v 60hz .6amps 68w
here are some snaps of it:
http://i301.photobucket.com/albums/nn65/hvideo1/Picture2-1.jpg
motor
http://sleeptyrant.com/Picture.jpg
the potentiometer I have from lighting controls (not sure if it will work for motor speed)