Connection Help - URGENT!!!

Discussion in 'The Projects Forum' started by krishnan_hari83, Feb 14, 2012.

  1. krishnan_hari83

    Thread Starter New Member

    Feb 11, 2012
    Hi guys,

    I am attaching two spec sheets, one that of a sensor & another an IC used along with it.

    Kindly clarify any additional circuits are required to connect these two.

  2. jimkeith

    Well-Known Member

    Oct 26, 2011
    The first appears to be a hall effect angular rotation sensor with analog output voltage--probably very simple to use.

    The second appears to be a linear displacement hall effect sensor--Internal EEPROM must be programmed via a serial interface in order to set all of the numerous parameters--difficult for the hobbyist to apply

    These two circuits perform similar functions, but is unlikely that they are used together.