Charge Controller

Discussion in 'The Projects Forum' started by kfrazie1, Mar 31, 2010.

  1. kfrazie1

    Thread Starter New Member

    Jan 4, 2010
    Is there anyway to control the charging current on a charge controller, specifically the NC25a 12 Volt model. I basically have it connected to a lead acid battery and my source is a DC PM generator. The charge controller is drawing around 14 Amps when I run at 15 Volts. My generator's max capacity is 14 amps so I want to run around 10 or 11 amps.