Hi All,
I've got the following specs for the design of source follower. I've been tryin it for last several days but unable to meet the specs. Please try and help with this.
Technology Details:
Lmin = 350nm
Vdd=3.3V
Specs
Output Impedance=100Ω
Load capacitance = 500f Farads
Voltage Swing >=2.5V
Unity gain Bandwidth >= 800MHz
Small signal input is fed from a 1 farad capacitor
PS: I'm still not clear what does unity gain b/w for common drain mean as the gain is always less than unity. Please help me guys.
I've got the following specs for the design of source follower. I've been tryin it for last several days but unable to meet the specs. Please try and help with this.
Technology Details:
Lmin = 350nm
Vdd=3.3V
Specs
Output Impedance=100Ω
Load capacitance = 500f Farads
Voltage Swing >=2.5V
Unity gain Bandwidth >= 800MHz
Small signal input is fed from a 1 farad capacitor
PS: I'm still not clear what does unity gain b/w for common drain mean as the gain is always less than unity. Please help me guys.