Hi all,
An another step in trying to build a brushless card , and also questions of course.
P:1500 W Average current:5A
Components selected:
- Motor controller MC33035
Bottom drive outputs: 12.9 --> 13 V High level
1.5 --> 2 V Low level for Vcc = 15 V
- FOD3120
Vf off = 0 --> 0.8 V
Vf on = 1.5 --> 1.8 V If on = 7 --> 16 mA
- MEA1D1509SC
Ouput : +- 56 mA
Question:
Where to connect E'U ?
Surely mistakes in this schematic, help needed .
If someone could check the draft, it would be great.
Thanks a lot .
jm
An another step in trying to build a brushless card , and also questions of course.
P:1500 W Average current:5A
Components selected:
- Motor controller MC33035
Bottom drive outputs: 12.9 --> 13 V High level
1.5 --> 2 V Low level for Vcc = 15 V
- FOD3120
Vf off = 0 --> 0.8 V
Vf on = 1.5 --> 1.8 V If on = 7 --> 16 mA
- MEA1D1509SC
Ouput : +- 56 mA
Question:
Where to connect E'U ?
Surely mistakes in this schematic, help needed .
If someone could check the draft, it would be great.
Thanks a lot .
jm
Attachments
-
477.4 KB Views: 12
-
380.4 KB Views: 12
-
526.3 KB Views: 7
-
2 MB Views: 11
-
72.6 KB Views: 17
Last edited: