My friend blew up his UBC3500XLT due to connecting it to a 12V Powersupply.
Some smoke and a nasty smell was the result.
The damage is shown on this foto:
http://s9.postimage.org/x6ylb2vu7/UBC_kapot.jpg

I opened my own radio where you can see the undamaged components.
http://s18.postimage.org/9gxe8rde1/ubc_heel.jpg

Can anyone identify the damaged components?
What should i buy to replace the burned items?

Like to hear from you,

Regards, Rolf Pieters, Utrecht - The Netherlands.

 

One is a diode, the other is a capacitor 220uF 10V, the diode will have blown and so will the capacitor, if you can replace them, you may be lucky and the scanner may still work.

 

Maybe that's a 10 amp, 100 volt Shottky surface mount diode.
If you squint your eyes just right, that circle with a star in it looks like a diode symbol.