Battle of the hall effect sensors part 2!

SgtWookie

Joined Jul 17, 2007
22,230
I tried searching for Hall-effect sensors with '502' in their part numbers a day or two ago with somewhat inconclusive results. Seems that the sensors I found indicated they were the "latching" type.

I don't know why yours would be a latching-type Hall-sensor unless there was a coil that received pulses to slowly build up a magnetic field to turn your latch off. That might be a way to establish PWM on the basis of how near or how far the Hall-effect sensor was from the coil being energized.

But I don't know enough about your throttle control. Trying to modify something like that definitely has the potential for injury, as it's a control for a motor-driven vehicle.
 

Thread Starter

kalikid1210

Joined Jul 15, 2008
21
SgtWookie,

One of the links was to the EXACT sensor with the #502, as in EW-502.

And this application will not be for a motor drive VEHICLE...no 'Red Asphalt' here!
 
Last edited:
Top