battery protector cord integrity change

Discussion in 'Homework Help' started by ger32, Aug 20, 2010.

  1. ger32

    Thread Starter New Member

    Jul 5, 2010
    I have a 12V Dometic/Waeco CF18DC cooler/freezer that has a built-in battery protector that its specs say cuts out when the battery discharges to 10.4V. I accidentally cut the 12v DC power-cord--have repaired it well with twist-on connectors. Will this affect the cut-out to be higher than 10.4v? I am wondering if the impedence, or resistance will lessen or increase and thus change what the voltage sensor in the appliance reads.
  2. mcgyvr

    AAC Fanatic!

    Oct 15, 2009
    No. the resistance difference should be very minimal.