Hello Friends,

This is Deeban from germany . As a part of my project i need to build up a basic asynch genrator model . I already saw a self -excited induction generator model and m not sure of it. If someone already has the model or someoneis very good at it can you please send de mdl file to <SNIP>
These are are parameters included in the model .And i Am supposed to model two generators one is fixed speed and the other is variable speed . Thank u ..
number of generators (max 2),
Pref (kW), RPMsync, slip (%), tangentslip, tau (s), main generator
P_loss_el (kW) at 0%, 50%, 100% Pref, main generator
P_loss_mech (kW) at 0%, 50%, 100% Pref, main generator
TauSwitch ( Time constant for switching operation between generators)
Pref (kW), RPMsync, slip (%), tangentslip, tau (s), second generator
P_loss_el (kW) at 0%, 50%, 100% Pref, second generator
P_loss_mech (kW) at 0%, 50%, 100% Pref, second generator
P_loss_mech Nref (mech. loss (kW) at RPM, gen. off), second generator

 

Hello Deeban,
Welcome to the Forums!
It is not good to post your E-mail address, as "spam bots" will find it and fill your E-mail inbox with garbage spam.

Try a search on Google for:
induction generator model +simulink
and you will get over 300,000 results to look at.

As far as this forum is concerned; we communicate help in threads, not via E-mail nor PM. Helping via PM and E-mail defeats the purpose of the Forum, jams up peoples' E-mail and PM's, and would wind up being disorganized and confused. Having all of your replies in one thread/topic helps a great deal in keeping things progressing towards a logical direction/conclusion, and helps other people who may have a very similar question.

 

thanks a lot as i was new i dint know !! will follow ur instructions thank u !