I was experimenting with electroplating copper to steel.
I first tried a 6vdc battery charger, which was too high volts.
Then I tried an ATX power supply using the orange 3.5 v wire, and it is also a little too high, I get a lot of hydrogen gassing off of the steel.
I have a lot of 5 watt 100 ohm resistors. Could they be used as a voltage divider?
I first tried a 6vdc battery charger, which was too high volts.
Then I tried an ATX power supply using the orange 3.5 v wire, and it is also a little too high, I get a lot of hydrogen gassing off of the steel.
I have a lot of 5 watt 100 ohm resistors. Could they be used as a voltage divider?