ADC0816 vclock generator

Discussion in 'Embedded Systems and Microcontrollers' started by wowmarwawow, May 18, 2010.

  1. wowmarwawow

    Thread Starter New Member

    May 18, 2010
    o'm new on this site and i want ask how can i generat a clock to an adc0816 to work as a ADC and how to synchorize it with n 8 bit p-in s-out shift register:)
  2. beenthere

    Retired Moderator

    Apr 20, 2004
    If you have a data sheet, you will see that the ADC is self-contained. You just need to start the conversion -

    At any time after the conversion, you can use some logic and the Output Enable to latch the conversion into the shift register. The serial shift is at your convenience.