Hi
I am trying to interface an External ADC ( bcoz of range constrains 10Volts)
which is TI device TLC2578.
I have correctly interfaced host and device in SPI as mentioned in data sheet.
I need some input about EOC/INT pin which currently I left it Open.
My SPI output at SDO (from ADC device) buffer always reads 0xFF
somebody please clarify how to use this pin.
Thanks
I am trying to interface an External ADC ( bcoz of range constrains 10Volts)
which is TI device TLC2578.
I have correctly interfaced host and device in SPI as mentioned in data sheet.
I need some input about EOC/INT pin which currently I left it Open.
My SPI output at SDO (from ADC device) buffer always reads 0xFF
somebody please clarify how to use this pin.
Thanks
Attachments
-
1 MB Views: 15