hello,

I've started working on c8051f320 uC from silabs. i have a signal from an LDR(light Dependant resistor), all i need to do is interface it with the in buit ADC and in turn transmit it to UART. well i've already coded the UART part. so could any one assist me with ADC interfacing code. And i would also like to know about Vref. External Vref or VDD to be configured


10 bit ADC 200ksps.
its a signal analog sinal so i need only single digital bit output.(1 0r 0). which i will give to SBUF0.
i've given my LDR signal to pin P1.0 already configured as analog pin for ADC

Thanks in Advance

 

Assuming you have the 256 page manual, start reading at page 39. The manual is easy to get online.