I just got done testing to see if my 600mA universal adapter would output more than 600mA. To do this I hooked it up to 12 39Ω resistors in parallel. I had theorized that when I hooked my meter into the circuit between one of the resistors that there would only be about 60mA going through it instead of the 75mA that ohms law predicted. Well 75mA is what it read across the board with a grand total of 864mA outputted by the adapter.
Do I not understand what a 600mA adapter means? I thought it could only output 600mA max?? Is this a flaw in the design? What's going on here?
Do I not understand what a 600mA adapter means? I thought it could only output 600mA max?? Is this a flaw in the design? What's going on here?