68HC711D3 Programming Help!

Discussion in 'Embedded Systems and Microcontrollers' started by secretstep, Jan 20, 2009.

  1. secretstep

    Thread Starter Member

    Jun 27, 2008

    I'm in a deep trouble with 68HC711D3 programming.
    I followed AN1010, http://www.freescale.com/files/microcontrollers/doc/app_note/AN1010.pdf
    , and made a reset switch.

    The problem is that PCBug11 cannot be run on my computer due to the speed problem, and to use JBug11, it says I need to have an external RAM first for 711D3.

    I need to make this programming work ASAP.
    I would appreciate if any help!