hi bill,, thanks for the info but i was wondering how do i set the circuit up for just 8 leds running . i was looking at 12-3 example d and that is for 9 leds, what pins do i need to not hook up on the outputs of the 4017 ..
hi all i need a schematic for a 8 segment night rider circuit using the 4017 chips. i have seen some on this forun using 9 and 15 but i guess what i need to know is if i use the 9 schematic witch output do i not hook up or change.. thanks bill
I decided I needed some punishment with MS Paint, so here's a version that will support just eight LEDs. I took Bill Marsden's 9-LED schematic, and trimmed it down by one.