Hi
I'm installing a new CNC router system in my wood shop.
I have a 3ph 4HP spindle that draws 17 amps/230v
Also 16hp blower 43amps/230v
One leg is 216v to ground/the other 2 are 120v each. Is this normal?
Are all legs to be almost =.Is this safe for my equipment?
Thanks for your response
Erminio
I'm installing a new CNC router system in my wood shop.
I have a 3ph 4HP spindle that draws 17 amps/230v
Also 16hp blower 43amps/230v
One leg is 216v to ground/the other 2 are 120v each. Is this normal?
Are all legs to be almost =.Is this safe for my equipment?
Thanks for your response
Erminio