3 Phase AC Motor Speed and Position Control

Thread Starter

cashme77

Joined Jun 23, 2014
1
HI all,
Im new to design and development of uC based solution. Im trying to control speed and position of 3 Phase AC Induction motor using ATMega1284P. I have successfully interfaced Rotary Encoder for judging position of rotor.
My aim is to send commands using serial for degrees to move in a particular direction with a certain speed and stop rotor on reaching the desired position.
Any help in this regards particularly a reference project will be highly appreciated.
 

MaxHeadRoom

Joined Jul 18, 2013
28,617
Although not Atmega based, there is app notes on the Picmicro site and also the Power IC manuf such as International Rectifier, Freescale etc.
Max.
 

Wendy

Joined Mar 24, 2008
23,415
The Completed Projects Forum is for Completed Projects only. It is meant to allow members to show plans for projects they built so other members can duplicate them if desired. New threads are also automatically moderated per Moderator review for this reason. Your thread does not belong in this forum, and was moved here.
 
Top