I have been trying to find help on a electric motor problem go days now AND CANT GET ANY HELP!!! CAN SOMEONE WITH ELECTRIC MOTOR KNOWLEDGE HELP ME?... I bought a air compressor with a non starting motor...it's a 220v 6.5hp replaced pressure switch and run and start caps, power on pressure switch no ark at pressure switch.. removed overheat cutoff breaker took wire from it and ran to back of stationary switch on motor.. and now I have ark and pressure switch but L1 L2 loose power when pressure switch is off I have 110 volts at L1 and L2 why? 220 is cut off at power on cut off there is 110v ? But still won't start??? Is my run cap and start cap wired incorrectly?