All About Circuits

20 Khz 800 volts power supply for ultrasonic welder

M

Thread Starter

Md.samimi@Gmail.com

Joined Jan 7, 2008
7
Hello every one.
i have a sonimat gm 2010 power supply that is supplying an ultrasonic welder that welds nonwoven materials.
i want to build a circuit to replace this power supply.
the output is 20khz in 800 to 1000 volts ac.
can anyone give me a circuit?:confused:
thanks.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
K Mounting LM317 TO-3 case Power Electronics 13
P Build a darn variable volts and current benchtop power supply Power Electronics 23
G Trying to replace li-ion 7.2 volts with power supply... failed. Power Electronics 10
Edward Arruda Extech 18V 3A power supply calibration. displayed voltage 2 to 3 volts low Technical Repair 7
E 72 volts to 12 volts power supply, burning resistor in series with +72 volts. Power Electronics 13
Similar threads
Mounting LM317 TO-3 case
Build a darn variable volts and current benchtop power supply
Trying to replace li-ion 7.2 volts with power supply... failed.
Extech 18V 3A power supply calibration. displayed voltage 2 to 3 volts low
72 volts to 12 volts power supply, burning resistor in series with +72 volts.

You May Also Like

Top