Good day everyone, i have a sony home theater thats dead, totally no output voltages at all. Im not able to post the service manual here as it says size too big. So i attached a capture of the schematic and the photos here.
VCC missing on STRF6168. VCC on STRV153 is fluctuating from 12v to 15v. I have replaced D923 (10V), D924 (24V), D925 (5.1V) and D926 (10V). If i remove D923, the voltage is stable at 13v. Am i missing something here? Something is not right somewhere. I have measured multiple times all the components on the board both SMD and through hole components. All seems to be ok and working fine.
VCC missing on STRF6168. VCC on STRV153 is fluctuating from 12v to 15v. I have replaced D923 (10V), D924 (24V), D925 (5.1V) and D926 (10V). If i remove D923, the voltage is stable at 13v. Am i missing something here? Something is not right somewhere. I have measured multiple times all the components on the board both SMD and through hole components. All seems to be ok and working fine.
Attachments
-
249.1 KB Views: 6
-
2.2 MB Views: 6
-
1.9 MB Views: 5
-
1.8 MB Views: 5
-
1.7 MB Views: 5