Hi guys,
Is there anyone who can help with the below?
I recently had to replace an M.2 socket on an XPS laptop, the old one was in very bad condition, and during the replacement 2 of the pads on the motherboard came out.
As you can see both pin A and B are not connected at the moment due to the missing pads on the motherboard.
Now, I've tested the SSD, and works fine but I was wondering if someone can let me know if those two pins are redundant and not essential or if it's worth it to wire jump them.
If yes to the last, where I can connect them?
thanks a lot to whoever would like to help.
Is there anyone who can help with the below?
I recently had to replace an M.2 socket on an XPS laptop, the old one was in very bad condition, and during the replacement 2 of the pads on the motherboard came out.
As you can see both pin A and B are not connected at the moment due to the missing pads on the motherboard.
Now, I've tested the SSD, and works fine but I was wondering if someone can let me know if those two pins are redundant and not essential or if it's worth it to wire jump them.
If yes to the last, where I can connect them?
thanks a lot to whoever would like to help.