Hi all,

Has anyone had any success getting a usb camera to talk to a MCU via a USB to SPI/I2Cadapter module?

If not, would this work...eventually?

Thanks

 

You have to go thru the calculations for bit rate to make sure the interface can handle the
resolution and color depth of the camera first.

Thats the primary consideration. Most SPI and CPU with USB peripheral can handle this I think.


Regards, Dana.

 

Hi all,

Has anyone had any success getting a usb camera to talk to a MCU via a USB to SPI/I2Cadapter module?

If not, would this work...eventually?

Thanks

Yes, via a max3421. Many controllers feature an OTG USB controller, so you can forget the SPI/I2C and run straight off of USB.