The circuit design by Mr Wayneh worked perfectly in alleviating Myokymia of right side.
Frequency of the myokymia was reduced from 10 to 6 within 6 days. Application: 2 times daily for 2 min.
One electrode just below tragus and the other just above the maxillary sinus area towards nose. For other pains like knee, improvement from 10 to 8. No placebo effect. Mr Wayneh has to be thanked for his intuitive efforts.
In order to improve his efforts further, I am trying to use FSM instead TENS (Wayneh in his first efforts) along with the micro-current stimulating device (MCD). I have planned to carry out the design in two steps; 1) creating a variable frequency from 0.5 to 1 KHz (optimum and more than sufficient) and 2) Changing the output voltage (20v -25V) to higher level keeping the current constant at 500 micro-ampere (either automatic with respect to change in load resistance or manual w.r.t improvement). I hope that this can be achieved by using boost circuit in boost-buck circuit. At this juncture I am collecting all possible technical data and trying to get inputs from experts. FSM for suffering reversal in quick time and Waneh MSD for fine tuning the state to original, means no re-occurrence please. One again I thank Mr Wayneh for the created inspiration in me.
Frequency of the myokymia was reduced from 10 to 6 within 6 days. Application: 2 times daily for 2 min.
One electrode just below tragus and the other just above the maxillary sinus area towards nose. For other pains like knee, improvement from 10 to 8. No placebo effect. Mr Wayneh has to be thanked for his intuitive efforts.
In order to improve his efforts further, I am trying to use FSM instead TENS (Wayneh in his first efforts) along with the micro-current stimulating device (MCD). I have planned to carry out the design in two steps; 1) creating a variable frequency from 0.5 to 1 KHz (optimum and more than sufficient) and 2) Changing the output voltage (20v -25V) to higher level keeping the current constant at 500 micro-ampere (either automatic with respect to change in load resistance or manual w.r.t improvement). I hope that this can be achieved by using boost circuit in boost-buck circuit. At this juncture I am collecting all possible technical data and trying to get inputs from experts. FSM for suffering reversal in quick time and Waneh MSD for fine tuning the state to original, means no re-occurrence please. One again I thank Mr Wayneh for the created inspiration in me.