To Whom It May Concern:
Most respectfully to everyone in this Forum please except my Appreciation and Thanks in advance for helping me in this problem.
DESCRIPTION OF THE WIRING AND DRIVER:
I have 48 Led PAR overhead lights running on the connected 10/8ft Tracks. The Driver inside the Led Light is as follows:
8-12X1W Transformer AC85-265V Output is 300mA. under These Lights are running under Dedicated 20Amp Breaker and single wall switch.
PROBLEM:
The Driver of the Led Light keep Blowing on me I have checked the following:
Any Loose Connection in between the Connector of Tracks everything seems to be working properly.
Your help in this regards will be greatly appriciated.
Thanks
Most respectfully to everyone in this Forum please except my Appreciation and Thanks in advance for helping me in this problem.
DESCRIPTION OF THE WIRING AND DRIVER:
I have 48 Led PAR overhead lights running on the connected 10/8ft Tracks. The Driver inside the Led Light is as follows:
8-12X1W Transformer AC85-265V Output is 300mA. under These Lights are running under Dedicated 20Amp Breaker and single wall switch.
PROBLEM:
The Driver of the Led Light keep Blowing on me I have checked the following:
Any Loose Connection in between the Connector of Tracks everything seems to be working properly.
Your help in this regards will be greatly appriciated.
Thanks
Last edited by a moderator:
