electromechanical

  1. 3

    Alternative part search; Smart card connector

    I am looking for alternative part/s for the following MFR part number: CCM02-2504LFT T30 (C&K - acquired by Little fuse) https://www.ckswitches.com/products/switches/product-details/SmartCard/CCM02%20MK2/ The above part is/has gone EOL. I have considered parts by Amphenol and TE...
  2. F

    Zero Air Gap Electric Motors could be improved?

    Hello, I've been looking into online scientific articles and I was able to find a few ones about the subject. On these articles it is normally observed that the torque value of the motors doubles or even quadruples with the direct contact of the rotor and the stator while consuming the same...
  3. MuzaffarMahmood

    Need a signal to start a motor on a specific position of another rotating rod by another motor once machine is started not everytime of that postion

    Need a signal to start a motor on a specific position of another rotating rod by another motor once machine is started not everytime of that postion of the roating rod. Rod is spining by a simple AC motor from turning ON the machine to turning OFF of the machine. So we want to syncronize...
  4. M

    Linear Actuator is not working with BTS7960

    Hello, I am trying to run linear actuator with BTS7960 motor driver and Arduino UNO. But, the code seems fine, wiring seems fine but after uploading the code, the linear actuator does not start. I am using two push buttons to extend and retract the actuator. The code is shown below: byte...
Top