capacitor blow

  1. I

    Capacitor Failure Issue

    Hi All, In one of our design we have manufactured LED strip PCB. In the design, there is LDO to regulate input voltage to 7.5VDC(V_MBI) from 24VDC(VIN) to feed an IC. As seen, F4 : 48V 120mA OZCJ0012FF2E as poly fuse, D9 : SMAJ26A as TVS. C7 : CC0603KRX7R9BB104 0.1uF 50VDC 0603 MLCC capacitor...
  2. C

    Help finding cap values on water damaged board

    Looking for some Help finding cap values and any other related chips on water damaged board. I'm looking to buy a new saa6581t and 4.332 crystal but not sure where to start on the rest. Is this board even salvageable or could the internals and tracks also be fried? Any help is appreciated...
  3. I

    Ceramic Capacitor Blowing in my design

    Dear All; I have a problem about a ceramic capacitor in my design. The problem occurs at C6. Note : C2 and C5 is same capacitor but no error occurs at them. C6 is 1uF, 50VDC, X5R, 0603 MLCC type capacitor (Mfg P/N : Samsung CL10A105KB8NNNC) Let me define the board and problem. - This...
Top