buck-converter

Hey everybody, first time here! As a personal project I am implementing a Buck Converter simulation in Python. My basic idea is to give a constant Vs supply and simulate the switch on/switch off steps in each switching period, calculate the increase/decrease in inductor current and calculate an...

I am using Arduino and Controlling FAN which works on 48v. so i am using 2 power supply smps in my design. One for Arduino that 5V smps and another for FAN that is 48V smps. I want to use single power supply in my design that is of 48Vdc. I was looking for a buck converter that will take 48V as...

1) Enter your expression for the dc component of the output voltage V: 2) For the buck with input filter, enter your expression for the dc component of the L2 inductor current I2: 3)For the buck with input filter, enter your expression for the dc component of the capacitor C1 voltage VC1...

I am working on some artwork that will have about 600 LEDs on it which each can consume about 30mA. (18A @ 5V). I am looking for a power supply solution to power all of these LEDs. My thought is to use a 24V or 36V power supply and buck that down to 5V for each strand of 100 LEDs (~3A @ 5V)...

Hey Everyone, I'm designing a circuit that I want to control via Bluetooth, over an iPhone or Android. This is my first schematic and PCB design and I'm looking for some help. I use EasyEDA for my capture and PCB layout. I attached my schematic as a PDF and I will post a link to my EasyEDA...