hi guys,
I am trying to make a s-video matrix selector switch
I make an unpowered version but I get bad picture qauilty when I have them all on the same setting.
So I decieded to build a powered version using a MAX452 video booster.
link herehttp://datasheets.maxim-ic.com/en/ds/MAX452-MAX455.pdf
now I am new to all of this
I have 4 inputs s-video RCA
dvd
tv
Sky perfect
PC
and I have 4 out puts going to 4 different TVs
I have 4x rotary switches which i can choose which channel to output on the 4 tvs
my questions are....
I am going from 100V ac to DC 5v for the chip is that right?
how do I wire in the chip?
how can i reduce noise?
can I integrate an remote?
I would ask at the shop where i bought it but I am in japan and do not speak much Japanese.
I will also make my own board which I am reading up now.
regards
Dan
I am trying to make a s-video matrix selector switch
I make an unpowered version but I get bad picture qauilty when I have them all on the same setting.
So I decieded to build a powered version using a MAX452 video booster.
link herehttp://datasheets.maxim-ic.com/en/ds/MAX452-MAX455.pdf
now I am new to all of this
I have 4 inputs s-video RCA
dvd
tv
Sky perfect
PC
and I have 4 out puts going to 4 different TVs
I have 4x rotary switches which i can choose which channel to output on the 4 tvs
my questions are....
I am going from 100V ac to DC 5v for the chip is that right?
how do I wire in the chip?
how can i reduce noise?
can I integrate an remote?
I would ask at the shop where i bought it but I am in japan and do not speak much Japanese.
I will also make my own board which I am reading up now.
regards
Dan