York Pacer 3501 Treadmill

Discussion in 'General Electronics Chat' started by susanmay, Mar 17, 2014.

  1. susanmay

    Thread Starter New Member

    Mar 17, 2014
    1
    0
    Hi, Hoping someone can Help. I have a York Pacer 3501 Treadmill, I recently received this from my uncle who passed away, but it is not going, I had to purchase a new Safety Key, which then allowed it to be turned on, but now it starts but stops after 4 seconds, I have replaced the speed senor, but the problem is still there, Can anyone please help me. Thanking you in antipication.:(Sue.
     
  2. R!f@@

    AAC Fanatic!

    Apr 2, 2009
    8,754
    760
    It still seems that it is still a tacho sensor issue.

    Does the TM gives an alarm or error?

    If the motor stops after starting, it could be possible the uC is not getting the sensor feedback signal.

    Is the sensor the correct type and if it is, is it wired correctly ?

    Some pictures will help.
     
    Last edited: Mar 17, 2014
    susanmay likes this.
  3. MaxHeadRoom

    Expert

    Jul 18, 2013
    10,553
    2,375
    There is usually a ribbed belt on the motor pulley driving the main T.M. belt, remove this and see if the motor stalls, if not then it could be a binding or friction issue.
    Max.
     
    susanmay likes this.
  4. Gdrumm

    Distinguished Member

    Aug 29, 2008
    684
    36
    susanmay likes this.
  5. Merlysys

    New Member

    Nov 17, 2013
    23
    1
    susanmay likes this.
Loading...