Hi all,
I am just looking at this CPLD:
http://www.xilinx.com/support/documentation/data_sheets/ds064.pdf
If I understand this correctly, it needs a 3.3V source BUT if you connect the VCCINT and the VCCIO to 5V then you can have input voltages at 5V and output voltages of 5V too?
All the best,
Robin
I am just looking at this CPLD:
http://www.xilinx.com/support/documentation/data_sheets/ds064.pdf
If I understand this correctly, it needs a 3.3V source BUT if you connect the VCCINT and the VCCIO to 5V then you can have input voltages at 5V and output voltages of 5V too?
All the best,
Robin