By mistack all the router s/w areased. I used HairyDairyMaid DMA s/w to load the cfe.bin file.
but that part of it because after loading the cfe.bin file still there is no IP respond from the router.
I'm seeking for the whole system s/w to load to the router.
(WRT54GV2 rev:XG) the files must be:
CFE.bin, NVRAM.bin, KERNEL.bin, WHOLEFLASH.bin
if someone can advice or has the file and can halp, will be balssed.
thanks
Azi

 

Try reading this web site. http://www.dd-wrt.com/wiki/index.php/Recover_from_a_Bad_Flash

 

Thank you. someone send to the CFE.BIN file with the right MAC number (so he say's) but still the router does not respond.