Wireless Intercom

Discussion in 'Wireless & RF Design' started by crivoli, May 13, 2006.

  1. crivoli

    Thread Starter Member

    May 4, 2006
    26
    0
    I have built an intercom off of the simple 200 GAIN design specified on the datasheet of the LM386 IC.

    http://cache.national.com/ds/LM/LM386.pdf

    I have thoughts of trying to get this to be a wireless intercom.
    This would be for only one microphone to one speaker.

    I am not sure where to proceed from here. I have read that I would need a RF transmitter, but I am not too familiar with all of this.

    Does anyone know of any tutorials that would be good to read, or any simple circuits I could look at that could explain how to make this wireless.

    Thanks
    -newbie
     
  2. crivoli

    Thread Starter Member

    May 4, 2006
    26
    0
    Ok, I have the intercom system working!

    I just want to seperate the microphone to one part of the house and leave the speaker on the other side of the house.

    What is the most simple way to acheive this?

    Please help. Thanks
     
Loading...