Hi there.

Have here one tablet
Prestigio PER5274B

It comes to me without battery.

Have here one battery which is with acceptable capacity and want to solder it to the board.
The board is htc c037 v4.2 20121214

I`ve tried with the model of the board + schematic but in first page of Google didn`t find anything.

Thanks;

 

Can you take a pic and post it? If you cannot find schematics, it would be hard for anyone else to read your mind..

Edit:
Googled your board #, found some pics that might interest you.
https://24.img.avito.st/1280x960/2419797424.jpg
http://i.imgur.com/CZ38tlh.jpg
http://s13.postimg.org/yjlxa1huf/screenshot_47.png

 

Are there any polarized components visible on the board, or do any of the traces have a ground connection? Sometimes you can infer the polarity of the major traces on the board.

 

Are there any polarized components visible on the board, or do any of the traces have a ground connection? Sometimes you can infer the polarity of the major traces on the board.

Yep.. I would use a multimeter (continuity mode) to check 1 pin of the battery connector and see if its attached to the ground plane or any other traces labeled as negative..

 

Here are the pics :

https://flic.kr/s/aHskEqDQCE

Do i think right - is the left landing - (near to Geil memory)?

Thanks in advance

 

Here are the pics :

https://flic.kr/s/aHskEqDQCE

Do i think right - is the left landing - (near to Geil memory)?

Thanks in advance

I am guessing the one on the golden trace is ground (negative)