Warwickshire Industrial Knitting Company .. Are You Local ?

Discussion in 'Technical Repair' started by easigrip, Jul 28, 2016.

  1. easigrip

    Thread Starter New Member

    Jul 28, 2016
    3
    0
    Hi we are a small industrial knitting company, with an electrical/electronic fault on a machne. We are looking for someone to come and take a look, weekends or evenings is fine. The motor will not run that winds up the fabric. I am told the motor is ok. We have changed the on/off switch and we have had the Rafi block tested that the on/off plugs into. We have a plug in for the Lenze, at present it is flashing green

    Many thanks

    Paul
     
  2. BR-549

    Well-Known Member

    Sep 22, 2013
    1,980
    388
    Where are you?
     
  3. easigrip

    Thread Starter New Member

    Jul 28, 2016
    3
    0
    Warwick
     
  4. MaxHeadRoom

    Expert

    Jul 18, 2013
    10,494
    2,364
    The motor with the problem, is it M1?
    What is the state of K10, enable relay?
    Unless you speak German, I would have had the prints translated, even if it was with Google.
    Max.
     
    Last edited: Jul 28, 2016
  5. jpanhalt

    AAC Fanatic!

    Jan 18, 2008
    5,671
    898
    I assume you mean Warwick, RI, USA. Nice place.
     
  6. MaxHeadRoom

    Expert

    Jul 18, 2013
    10,494
    2,364
    Warwick, Warwickshire.
    Usually when someone does not give a state, I assume UK based.
    Max.
     
  7. easigrip

    Thread Starter New Member

    Jul 28, 2016
    3
    0
    Hi

    Sorry for the confusion, I am in Warwick in The UK
     
  8. MaxHeadRoom

    Expert

    Jul 18, 2013
    10,494
    2,364
    How about post #4?
    Max.
     
Loading...