Voice Bluetooth device

Discussion in 'The Projects Forum' started by Xapns, Nov 6, 2015.

  1. Xapns

    Thread Starter New Member

    Jan 16, 2012
    2
    0
    Hi, i want some help with a bluetooth device i need to make with a board or arduino and i wondered if you can help me.

    In my work (Food Logistics) i have a device that has a headset but since it's annoying for working with it for 8 hours i wanted to replace it with a bluetooth handsfree.

    The device doesn't have bluetooth,it has a four pin plug for the headset, two are for the headphone and two for the mic.

    Can you tell me if i can make a board (or arduino) that will be able to connect with the device through these four pins and also with a bluetooth handsfree to recieve the instructions from my device and also send the answer back through the bluetooth handsfree mic?

    I saw that there are arduino with bluetooth but i dont know if those can be bidirectional and how to program.
    I don't know how to make a code for programming, i just need to make this work.
    I can make a board and solder if someone can make a schematic for me, i just can't make a code for a board or arduino, so if someone can help me build this and give me the code i would be very gratefull!!!

    Thank you in advance!!!

     
  2. blocco a spirale

    AAC Fanatic!

    Jun 18, 2008
    1,438
    368
    If you have no programming or electronic design experience, the answer to whether or not you can do this is no. You're asking for someone to undertake many hours of specialised development work on your behalf, no one who values their time will do this for free.
     
    Last edited: Nov 6, 2015
  3. Xapns

    Thread Starter New Member

    Jan 16, 2012
    2
    0
    i did spend many hours for others many times without asking for money!
    And this is an opinion of one person, maybe someone else has the time and the willing to help!
    This is the purpose of forums, to help people and give knowledge for free.
    I was a moderator in a gps forum for two years, i never asked for money
    and i helped even in the most stupid question without making fun of anyone!
    i believe that when you can't or don't want to help, you just don't speek!
     
  4. blocco a spirale

    AAC Fanatic!

    Jun 18, 2008
    1,438
    368
    I'm not making fun of anyone, I'm just being realistic. You're asking for a design for a very specific application and for which you have provided no useful detail. I am entirely in favour of assisting anyone, providing they have put in some research and thought and have specific questions, that's really the point of these forums. This is very different from expecting someone to hand you a complete hardware and software solution and provide the necessary support to troubleshoot and debug the design i.e. a free design and consultancy service with unlimited post-design support.

    Do you think that if I joined an architect's forum, someone would design a house for me for free? I doubt it, but they may assist with answering specific questions and providing advice,and more so if I had researched the subject and put some ideas and designs on paper. Why would I expect any more?
     
    Last edited: Nov 7, 2015
Loading...