VCA810 AGC Amplifier

Discussion in 'General Electronics Chat' started by ardali, Feb 21, 2013.

  1. ardali

    Thread Starter New Member

    Dec 4, 2012
    Hello ,
    In Fig 32 of VCA810 datasheet the ACG circuit given mentions that resistors R1 through R3 determine attack and release times and resistor R4 and capasitor Cc phase compansate the AGC feedback loop. My question is what component values to use for 40 kHz input instead of 100 kHz ?
    O. Ardali
    Last edited: Feb 21, 2013